Endress+Hauser Nanomass Gas Density Operating Instructions Manual Download Page 28

Page: 28 / 92

Operating options

Nanomass Gas Density

Hauser

8.2.2

Functions

8.3

Access to the measuring device via the

"Nanomass Communication" operating tool

8.3.1

Function scope

The measuring device can be operated and configured via the "Nanomass Communication"

operating tool. The parameter structure is the same as with the local display (

→



75). In

addition to the measured values and the parameters, status information on the measuring

device is also displayed and allows the user to monitor the status of the device. Furthermore

the measuring device data can be managed and visualized and basic device parameters (e.g.

calibration factors or device clock) can be configured.

8.3.2

Prerequisites

Hardware

Function

Operation

Display measured values

Once the measuring device has been connected to

the supply voltage and the measuring device is
ready for operation, the measured values appear
on the operational display.

Enter parameterization

The user is in the operational display mode.

‣

Press Enter.

Disable write protection via access code

Parameterization is protected by an access code.
This code cannot be configured.

‣

Enter the access code

0074

using the plus and

minus keys. Press Enter to confirm each digit.

Navigate between the menus or submenus

The user is in the parameterization view in a
menu or submenu.

‣

Press the Plus or Minus key.

Call submenus or parameters

The user is in the parameterization view in a
menu or submenu.

‣

Press Enter.

Change parameter values

The user has called up a parameter.

‣

Press the Plus or Minus key.

Navigate within the parameter value to the next
number or digit

The user has called up a parameter and makes
changes to a parameter value.

‣

Press the Plus and Enter key or the Minus and
Enter key simultaneously.

Confirm entries

The user has called up a parameter and makes
changes to a parameter value.

‣

Press Enter.

Navigate to the next parameter

The user has called up a parameter.

‣

Press Enter.

Return to the previous menu or submenu

‣

Press the Plus and Minus key simultaneously.

Connecting cable

Depends on the device interface:
• USB cable: mini USB, type B, Buccaneer; standard USB, type A or

• RS232 cable: M12, 4-pin, gold contact; D-Sub, 9-pin

Summary of Contents for Nanomass Gas Density





























































































Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands

Endress+Hauser Nanomass Gas Density, Operating Instructions Manual

Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands