Endress+Hauser Nanomass Gas Density Operating Instructions Manual Download Page 85

Page: 85 / 92

Nanomass Gas Density

Appendix

Hauser

Reference temperature

Prerequisite

This function is only available if the "Fixed" option

was selected in the

"Density type" function.

Description

Use this function to enter a reference temperature for calculating the

reference density.

User entry

Decimal number with sign

Factory setting

20 °C

Additional information

The unit depends on the unit selected in the "Temperature" parameter.

Concentration unit

Prerequisite

This function is only available if the "Flexible" option

was selected in the

"Density type"

function.

Description

Use this function to select a unit for calculating the concentration.

Options

• % Mass 3D
• % Volume 3D

• Other 3D

Factory setting

% Volume 3D

Concentration names

Prerequisite

This function is only available if the

"Flexible" option

was selected in the

"Density type" function.

Description

Use this function to enter a specific name for the concentration
specification.

User entry

Character string consisting of a maximum of ten letters, numbers, blank

spaces and/or special characters.

Factory setting

1st coeffs, 2nd coeffs, 3rd coeffs, 4th coeffs

Concentration selection

Prerequisite

This function is only available if the "Flexible" option was selected in the

"Density type" function.

Description

Use this function to select the concentration specification that is to be
displayed.

Options

The names that were defined in the "Concentration names" parameter for
the concentration specifications.

Factory setting

1st coeffs

Additional information

Four different concentration specifications are available which can be
used to define different concentrations. By selecting a concentration
specification and the associated settings, up to four concentrations can be

configured and selected where necessary.

Display precision

Prerequisite

This function is only available if the "Flexible" option was selected in the
"Density type" function.

Description

Use this function to select the accuracy of the concentration display

Options

• 0
• 0.1

• 0.01
• 0.001

Factory setting

0.01

Summary of Contents for Nanomass Gas Density





























































































Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands

Endress+Hauser Nanomass Gas Density, Operating Instructions Manual

Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands