Endress+Hauser Nanomass Gas Density Operating Instructions Manual Download Page 30

Page: 30 / 92

Operating options

Nanomass Gas Density

Hauser

First connection of the device

If the device is connected the first time on the computer, it will incorrectly recognized.

‣

In case of first device connection install USB driver.

Install USB driver:
1. Depending on the version, connect the device to your computer via the USB- or the

RS232-interface.

2. Open the Device Manager.
3. Update the driver software by right click on the device.
4. Select the manual search and the installation of the driver software in the installation

window. The driver software is located in the directory "drivers/USB_driver_F".

5. Follow the instructions in the following installation windows.

No COM port is displayed

1. Select "Refresh" in the "COM-Port" selection box.



The PC updates the picklist.

2. In the "COM-Port" selection box, select the COM port assigned by the PC for the

connected measuring device.

Summary of Contents for Nanomass Gas Density





























































































Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands

Endress+Hauser Nanomass Gas Density, Operating Instructions Manual

Search results

Summary of Contents for Nanomass Gas Density

Reviews:

Related manuals for Nanomass Gas Density

Brands by name

Popular brands