Endress+Hauser Nanomass Gas Density, Operating Instructions Manual

Page: 63 / 92

Nanomass Gas Density Accessories
Hauser 63
15 Accessories
Various accessories are available for the measuring device, and can be ordered with the
measuring device or at a later stage from Hauser. Detailed information on the
appropriate order code is available from your local Hauser Sales Center or on the
product page of the Hauser website: www.endress.com .
15.1 Device-specific accessories
15.2 Service-specific accessories
Accessories Description
Power cable Cable of 5 m (15 ft) length for power supply.
Power connector Connector for power cable, 2-pin.
RS232 service cable Cable of 2 m (6 ft) length for communication with Nanomass Communication.
RS232 connector Connector for service cable.
4-20mA connector Kit of 2 connectors for connecting the analog measuring signal with a higher-order
system.
USB cable Cable of 2 m (6 ft) length for power supply and communication with Nanomass
Communication.
Grounding clamp Grounding clamp for RS232 or USB version.
¹ ⁄ ₄ "-Swagelok pipe fi tting For the mounting of the measuring device and the filter in the pipeline.
Filter cartridge Kit of 3 spare filter cartridges to change the used filters.
Pipe mounting set To secure to a pipe or post.
Tabletop stand To secure to a tabletop.
Accessories Description
Applicator Software for selecting and sizing Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum flowmeter: e.g.
nominal diameter, pressure loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and
parameters throughout the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation
W@M Life cycle management for your plant.
W@M supports you with a wide range of software applications over the entire
process: from planning and procurement, to the installation, commissioning and
operation of the measuring devices. All the relevant device information, such as the
device status, spare parts and device-specific documentation, is available for every
device over the entire life cycle.
The application already contains the data of your Hauser device.
Hauser also takes care of maintaining and updating the data records.
W@M is available:
• Via the Internet: www.endress.com/lifecyclemanagement
• On CD-ROM for local PC installation