Chapter 7 Parameters
EMSD5 AC Servo Manual
68
No.
Name
Function
Rang
Default
range
UCO2N(speed coincidence) is ON, otherwise
OFF.
PA-77
2
nd
numerator
of electronic
gear for
position
command
pulse
Refers to parameter PA-12.
0-32767
0
PA-78
3
rd
numerator
of electronic
gear for
position
command
pulse
Refers to parameter PA-12.
0-32767
0
PA-79
4
th
numerator
of electronic
gear for
position
command
pulse
Refers to parameter PA-12.
0-32767
0
PA-80
Effective level
of command
direction
signal
Set to:
0: High level is positive direction.
1: Low level is positive direction.
0-1
0
PA-81
PULS signal
filter of
command
pulse
1.To filter the input PULS signal.
2.The default value is the max pulse input
frequency: 500khz(kpps). The value is bigger, the
max input frequency is slower.
3.To filter the noise from the signal line in order
to avoid incorrect counting happening. If it goes
wrong due to the incorrect counting, you can
increase the value of this parameter properly.
4. After editing this parameter, please save it and
recharge. Then it is effective.
0-15
4
PA-82
SIGN signal
filter of
command
pulse
1.To filtering the input SIGN signal.
2.The default value is the max pulse input
frequency: 500khz(kpps) The value is bigger, the
max input frequency is slower.
3.To filter the noise from the signal line in order
to avoid incorrect counting happening. If it goes
wrong due to the incorrect counting, you can
increase the value of this parameter properly.
4. After edited this parameter, must save it and
0-15
4
