EMSD5 AC Servo Manual
Chapter 5 Running Mode and Wiring
51
⚫
Driver power supply, auxiliary power supply, grounding end and other wiring should be
wired correctly. Each control signal cable connection should be correct. Each limit switch,
protection signal have been correctly connected.
1)
Enabled switch in OFF state.
2)
Cut off power supply circuit and stop alarm circuit to maintain access ope.
3)
Servo driver applied voltage reference should be correct.
⚫
Power the servo drive when the controller does not send a running command signal. Check
and guarantee:
1)
The servo motor can turn normally without vibration or operating sound phenomenon.
2)
All parameters are set correctly, according to different mechanical characteristics and
please do not over-set extreme parameters.
3)
Bus voltage indicator lamp and digital tube display are normal.
