EMSD5 AC Servo Manual
Chapter 6 Operation and Display
53
Fig.6-2 Main Menu
6.3 Steps To Set Parameters
Select “PA-” and press SET button to enter the status of parameter setting mode. And use
or
to choose parameters and then press SET button to display the parameter value. You can
modify the value with
or
key. Press
key or
key once, the parameter value
increases or decreases by 1. Pressing and holding
or
key can make the value increased
or decreased continuously. After modifying the value of the parameter,please press SET button
and when the LED flashes two times, it means the setting is completed. Finally please recharge,
then the new parameter is effective.
6.4 Status Monitoring
In the first layer, select “DP--” and press SET button to enter into monitoring mode. There are 23
displays in total. Users select the desired display mode with
or
key, and then press SET
button to enter into the specific states.
Status
Operation
Example
Definition
Motor speed:1000r / min
The current position:124580
Position command:124581
