Emerson Rosemount 3144P, Reference Manual

Page: 178 / 236

168
Reference Manual
00809-0100-4021, Rev JA
Configuration
April 2017
Configuration
The following are the default tags for each of the possible Function blocks which display data on the LCD
display:
All other custom tags that are entered must be: numbers 0–9, letters A–Z, and/or spaces.
The following are the standard temperature units codes displayed on the LCD display:
All other custom units that are entered must be: numbers 0–9, letters A–Z, and/or spaces.
If the value of the process variable displayed has a bad or uncertain status, the following is shown:
When power is first applied, the LCD display will display the following:
If the device goes from “Auto” mode to Out-of-Service (OOS) mode, the LCD display will display the
following:
Block name LCD display bottom line
Transducer “TRANS”
AI 1400 “AI 14”
AI 1500 “AI 15”
AI 1600 “AI 16”
PID 1700 “PID 1”
PID 1800 “PID 1”
ISEL 1900 “ISEL”
CHAR 2000 “CHAR”
ARITH 2100 “ARITH”
OSPL 2200 “OSPL”
Units LCD display bottom line
Degrees C “DEG C”
Degrees F “DEG F”
Degrees K “DEG K”
Degrees R “DEG R”
Ohms “OHMS”
Millivolts “MV”
Percent (%) Uses the percent symbol
Status LCD display bottom line
Bad “BAD”
Uncertain “UNCTN”
LCD display top line LCD display bottom line
“3144” blank
LCD display top line LCD display bottom line
“OOS” blank