Emerson Rosemount 3144P, Reference Manual

Page: 173 / 236

163
Reference Manual
00809-0100-4021, Rev JA
Configuration
April 2017
Configuration
SPM#_User command
Select “Learn” after all of the parameters have been configured to begin the Learning Phase. The
monitoring phase starts after the learning process is complete. Select “Quit” to stop the SPM. “Detect”
may be selected to return to the monitoring phase.
Baseline values
The baseline values are the calculated values from the process over the learning cycle.
SPM#_Baseline_Mean
SPM#_Baseline_Mean is the calculated average of the process variable over the learning cycle.
SPM#_Baseline_Standard_Deviation
SPM#_Baseline_Standard_Deviation is the square root of the variance of the process variable over the
learning cycle.
4.11 Troubleshooting guides
Figure 4-2. Troubleshooting Flowchart
Device does not appear
on segment.
Problem Identified?
Yes
No
Perform Recommended
Action, see Table 4-11 .
Check Segment, see Device does not
stay on segment in Table 4-11 for
more information.
Problem Identified?
Yes No
Perform Recommended
Action, see Table 4-12 on
page 164 .
If the problem persists
contact a sales representative.
Problems with communications
Device does not
stay on segment.
1. Check wiring to device.
2. Recycle power to device.
3. Electronic failure.
Refer to “Device does not show up on segment” on
page 164 in Table 4-11 for more information.