Emerson FIELDVUE DVC6200f, Instruction Manual

Page: 18 / 326

DVC6200f Digital Valve Controller
November 2010 6
Table 1-1. Specifications (continued)
Electromagnetic Compatibility
Meets EN 61326 - 1 (First Edition)
Immunity—Industrial locations per Table 2 of
the EN 61326
-
1 standard. Performance is
shown in table 1-2 below.
Emissions—Class A
ISM equipment rating: Group 1, Class A
Lightning and Surge Protection—The degree of
immunity to lightning is specified as Surge immunity
in table 1-2. For additional surge protection
commercially available transient protection devices
can be used.
Vibration Testing Method
Tested per ANSI/ISA-75.13.01 Section 5.3.5. A
resonant frequency search is performed on all three
axes. The instrument is subjected to the ISA
specified 1/2 hour endurance test at each major
resonance.
Humidity Testing Method
Tested per IEC 61514
−
2
Electrical Classification
Hazardous Area Approvals
CSA— Intrinsically Safe and FISCO,
Explosion-proof, Division 2, Dust Ignition-proof
FM— Intrinsically Safe and FISCO,
Explosion-proof, Non-Incendive,
Dust Ignition-proof
ATEX—Intrinsically Safe, FISCO and Dust,
Flameproof and Dust, Type n and Dust
IECEx— Intrinsically Safe and FISCO,
Flameproof, Type n
Electrical Housing
CSA— Type 4X, IP66
FM— NEMA 4X
ATEX—IP66
IECEx— IP66
Refer to Special Instructions for “Safe Use” and
Installation in Hazardous Locations, tables 1-3, 1-4,
1-5, and 1-6, and Appendix B for specific approval
information.
The Gas Certified DVC6200f is FM, ATEX, IECEx
and CSA Single Seal approved for use with
natural gas as the supply medium.
Connections
Supply Pressure: 1/4 NPT internal and integral
pad for mounting 67CFR regulator
Output Pressure: 1/4 NPT internal
Tubing: 3/8-inch recommended
Vent: 3/8 NPT internal
Electrical: 1/2 NPT internal, M20 adapter optional
Actuator Compatibility
Stem Travel (Sliding-Stem Linear)
Minimum: 11 mm (0.45 inch)
(5)
Maximum: 606 mm (23-7/8 inches)
Shaft Rotation (Quarter-Turn Rotary)
Minimum: 45
Maximum: 90
Weight
3.5 kg (7.7 lbs)
Construction Materials
Housing, module base and terminal box: ASTM
B85 A03600 low copper aluminum alloy
Cover: Thermoplastic polyester
Elastomers: Nitrile (standard)
Options
Supply and output pressure gauges or Tire
valves, Integral mounted filter regulator,
Low-Bleed Relay, Extreme Temperature,
Natural Gas Certified
Contact your Emerson Process Management sales
office or go to www.FIELDVUE.com for additional
information.
Declaration of SEP
Fisher Controls International LLC declares this
product to be in compliance with Article 3 paragraph
3 of the Pressure Equipment Directive (PED) 97 /
23 / EC. It was designed and manufactured in
accordance with Sound Engineering Practice (SEP)
and cannot bear the CE marking related to PED
compliance.
However, the product may bear the CE marking to
indicate compliance with other applicable European
Community Directives.
NOTE: Specialized instrument terms are defined in ANSI/ISA Standard 51.1
−
Process Instrument Terminology.
1. The pressure/temperature limits in this document and any other applicable code or standard should not be exceeded.
2. Normal m
3
/hour
−
Normal cubic meters per hour at 0 C and 1.01325 bar, absolute. Scfh
−
Standard cubic feet per hour at 60 F and 14.7 psia.
3. Values at 1.4 bar (20 psig) based on a single - acting direct relay; values at 5.5 bar (80 psig) based on double - acting relay.
4. Temperature limits vary based on hazardous area approval.
5. For travel less than 11 mm (0.45 inch) contact your Emerson Process Management sales office.
1