Emerson FIELDVUE DVC6200f, Instruction Manual

Page: 245 / 326

Parts
November 2010 233
Parts List
Note
Part numbers are shown for
recommended spares only. For part
numbers not shown, contact your
Emerson Process Management sales
office.
Parts with footnote numbers shown
are available in parts kits; see footnote
information at the bottom of the page.
Key Description Part Number
Note
Housing
(see figure 8-2)
1 Housing
(7)
52 Vent, plastic
(2)
271 Screen
(7)
287 Gasket, Housing A only (used for GX actuator)
288 Seal, Housing A only (used for GX actuator)
Common Parts
(see figure 8-2 and 8-3)
16* O-ring
(1)
(3 req’d)
29 Warning label, for use only with LCIE hazardous area
classifications
33 Mach Screw, pan hd, SST
(2)
(3 req’d)
38 Cap Screw, hex socket, SST
(2)(6)
(3 req’d)
43* Cover Assembly (includes cover screws)
Aluminum Construction
Standard 38B9580X022
Extreme temperature option
(fluorosilicone elastomers) 38B9580X032
48 Nameplate
49 Screw, self tapping (2 req’d)
(6)
61 Pipe Plug, hex socket
(6)
Housing A with relay C (2 req’d ) (used for GX actuator)
Housing A with relay B (1 req’d) (used for GX actuator)
Housing B with relay B and C (1 req’d)
(used for all actuators except GX)
Not required for relay A
63 Lithium grease (not furnished with the instrument)
64 Anti-seize compound (not furnished with the instrument)
65 Lubricant, silicone sealant (not furnished with the instrument)
154 Retaining Ring
(2)
(3 req’d)
236 Screen (required for relay B and C only)
(7)
237 Module Base Seal
(1)
Key Description Part Number
Module Base
(see figure 8-2)
2 Module Base
(6)
11 Drive Screw
(6)
(2 req’d)
12 O-ring
(1)
19 Label, Shield Assembly
(6)
61 Pipe Plug, hex socket
(6)
(3 req’d)
243 Slotted Pin (flame arrestor)
(6)
(3 req’d)
I/P Converter Assembly
(see figure 8-2)
23 Cap Screw, hex socket, SST
(2)(8)
(4 req’d)
39* O-ring
(1)(3)(5)
41 I/P Converter
(5)
169 Shroud
(5)(8)
(not shown, see figure 7-4)
210* Boot, nitrile
(1)(5)
(2 req’d) (see figure 7-4)
231* Seal Screen
(1)(3)(5)
Relay
(see figure 8-2)
24* Relay Assembly, (includes shroud, relay seal, mounting screws)
Standard (nitrile elastomers)
Standard Bleed
Housing A (used for GX actuator)
Single-/acting direct (relay C) 38B5786X182
Single-acting reverse (relay B) 38B5786X172
Housing B (used for all actuators except GX)
Single-acting direct (relay C) 38B5786X132
Double-acting (relay A) 38B5786X052
Single-acting reverse (relay B) 38B5786X092
Low Bleed
Housing A (used for GX actuator)
Single-acting direct (relay C) 38B5786X202
Single-acting reverse (relay B) 38B5786X192
Housing B (used for all actuators except G)
Single-acting direct (relay C) 38B5786X152
Double-acting (relay A) 38B5786X072
Single-acting reverse (relay B) 38B5786X112
Extreme Temperature option (fluorosilicone elastomers)
Standard Bleed
Single-acting direct (relay C) 38B5786X142
Double-acting (relay A) 38B5786X032
Single-acting reverse (relay B) 38B5786X102
Low Bleed
Single-acting direct (relay C) 38B5786X162
Double-acting (relay A) 38B5786X082
Single-acting reverse (relay B) 38B5786X122
8
*Recommended spare
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
3. Available in the Seal Screen Kit
5. Available in the I/P Converter Kit
6. Available in the Spare Module Base Assembly Kit
7. Available in the Spare Housing Assembly Kit
8. Available in the Spare Shroud Kit