EMC Connectrix DS-32M2, User Manual, Page: 317 / 356

D
perfshow
D-69
Command Line Interface
Output Example The output from show.ip.ethernet is similar to the following:
Port Port Binding Bound WWN
---- ----------- -----------------------
0 Active AA:00:AA:00:AA:00:AA:00
1 Inactive 00:00:00:00:00:00:00:00
2 Inactive CC:33:44:55:CC:33:44:55
3 Active 00:00:00:00:00:00:00:00
4 Inactive 00:00:00:00:00:00:00:00
5 Inactive 00:00:00:00:00:00:00:00
6 Inactive 00:00:00:00:00:00:00:00
7 Inactive 00:00:00:00:00:00:00:00
8 Inactive 00:00:00:00:00:00:00:00
9 Inactive 00:00:00:00:00:00:00:00
10 Inactive 00:00:00:00:00:00:00:00
11 Inactive 00:00:00:00:00:00:00:00
12 Inactive 00:00:00:00:00:00:00:00
13 Inactive 00:00:00:00:00:00:00:00
14 Inactive 00:00:00:00:00:00:00:00
15 Inactive 00:00:00:00:00:00:00:00
show.switch
Syntax
switch
Purpose This command displays switch attributes.
Parameters This command has no parameters.
Command Example
Root> show switch
Output The switch attributes data is displayed as a table that includes the
following properties.
◆
State — The state of the switch (for example, on line or off line).
◆
BB Credit — The BB _Credit as set in the config.switch.bbCredit
command.
◆
R_A_TOV
— The R_A_TOV as set in the config.switch.raTov
command.
◆
E_D_TOV — The E_D_TOV as set in the config.switch.edTov
command.
◆
Preferred Domain Id — The domain ID as set in the
config.switch.domainId command.