EMC Connectrix DS-32M2 User Manual Download Page 159

Page: 159 / 356

Audit Log

6-5

Using Logs

◆

Source

— Identifies the user making the change through the

switch Product Manager and IP or DNS host name address of the
remote user’s workstation:

• Maintenance Port: Change was made by a user connected to

the maintenance port.

• Connectrix Manager: Change was made by an Product

Manager user.

• SNMP: Change was made by a remote SNMP management

station.

• Fabric: Change was initiated by another switch/director in the

fabric that is not managed by this Connectrix service
processor.

• Web Server: Change was made by a user through the

Embedded Web Server interface.

• Fibre Channel Host: Change was made inband by a Fibre

Channel host through the open systems management server.

• Telnet: Change was made through a Telnet connection.

◆

Identifier

- Identifies the user making the change according to the

source:

• Maintenance Port: No entry appears.

• Connectrix Manager: Includes <user>@<address>, where

<user>

is the Product Manager user name, and <address> is

the network address of the workstation (remote user
workstation or Connectrix service processor).

• SNMP: Contains the network address of the SNMP

management station.

• Fabric: No entry appears.

• Web Server: Includes <user>@<address>, where <user> is the

Web Server user name and <address> is the network address
of the Web user.

• Fibre Channel Host: No entry appears.

• Telnet: Change was made through a Telnet connection.

Summary of Contents for Connectrix DS-32M2





































































































































































































































































































































































Search results

Summary of Contents for Connectrix DS-32M2

Reviews:

Related manuals for Connectrix DS-32M2

Brands by name

Popular brands

EMC Connectrix DS-32M2, User Manual

Search results

Summary of Contents for Connectrix DS-32M2

Reviews:

Related manuals for Connectrix DS-32M2

Brands by name

Popular brands