13
Full-electronic HV-Tester F1-1x Typs
2. SAFETY REGULATIONS
2
SAFETY INSTRUCTIONS
Before working with the tester the operating instructions and all enclosures
must have been attentively read and understood by all persons operating the
tester. The tester may be operated by trained and skilled staff only.
When the device is in operation, voltages of up
to 5000 AC / 6000 DC Volt
can be produced. If the device is fitted with options, significantly higher
voltages can occur.
There is mortal danger when working with high
voltage!
ELABO has therefore equipped this device and all its components
with all the necessary safety features to protect the user against hazards
that may occur during correct use. Please note:
CAUTIOUS AND CAREFUL WORKING IS THE BEST PROTECTION
FROM ACCIDENTS !
2.1
Markings for safety instructions and warnings
Danger Zone
Electric High Voltage - danger to life !
IN DEALING WITH HIGH VOLTAGE THERE IS DANGER TO LIFE!
This marking warns of a point that is hazardous due to high electrical volt-
age. It is given beside all work steps during which there is
risk of serious
injury
for the operator or others. It is given beside working and operating
procedures that are to be followed exactly to ensure people or the tester
are not endangered by high electrical voltage.
PAY ATTENTION TO THE NOTES AND ACT VERY CAREFUL IN
THESE SITUATIONS. ALSO PASS ALL SAFETY REGULATIONS ON
TO OTHER OPERATORS.
Caution !
This sign signifies
danger for the tester
in case of non-observance of
instruction.
Note!
This sign signifies that a more effective and more economic use of the
tester is possible.
2.2
Warranty
Claims under the warranty can only be made if the warranty conditions
in the general terms and conditions are followed. The conditions in the
operating instructions are also to be observed.
