SE-1200 Series Electrocardiograph User Manual Operation Preparations
- 31 -
NOTE:
1. When turning off the device, follow the above sequence strictly, or else there may be
something wrong on the screen.
2. Do not hold down the
key when the device displays the hint information
System
is shutting down…
on the screen.
3.6 Loading/Replacing Recorder Paper
Two kinds of recorder paper can be used. One is the folded thermal paper, and the other is the
rolled thermal paper.
NOTE:
1. When the folded thermal paper is used, the paper roller is unnecessary and must be
taken out.
2. When using the paper of 216mm in width, the two movable parts should be removed.
3. The exit edge can help you tear the recorder paper.
CAUTION
Make sure that the recorder paper, is installed in the center of the recorder, and the paper
edge is parallel with the casing edge in the direction of advancing paper, in order to avoid
paper deviation or damage to the paper edge.
When the recorder paper runs out or is not loaded, the hint message
No Paper
will appear on the
screen. Then you should load or replace the recorder paper immediately.
Movable
Part 2
Movable
Part 1
Casing Button
Paper Tray
Groove
Paper Roller
Casing
Exit
Exit Edge
(Edge for
tearing paper)
理邦保密文件
EDAN CONFIDENTIAL
