SE-1200 Series Electrocardiograph User Manual Managing Files
- 73 -
Chapter 9 Managing Files
If you want to save the ECG data in the electrocardiograph, you should set
Auto
Save
to
to
ECG
in the
File Setup
window. Then the ECG data in the auto or rhythm mode will be saved on the
File Manager
screen automatically. For details, please refer to Section 10.10 “File Setup”.
On the
File Manager
screen, files can be printed, transmitted, exported, displayed, edited
searched or deleted.
CAUTION
1. When files are being printed, transmitted, deleted or exported, you cannot turn off the
electrocardiograph.
2. Do not cut off the mains supply directly when no battery is installed in the device, or
else, the stored data may be lost.
9.1 Transmitting Files
Make configuration in accordance with Section 7.1 “Transmitting ECG Data” before you transmit
files.
Pressing
Trans All
on the
File Manager
screen1 can transmit all the files from the
electrocardiograph.
Or, select
Trans
on
the
File Manager
screen2, and then press
Enter
to transmit the selected file
from the electrocardiograph.
NOTE:
If you select
Delete After Trans. Or Export
in the
File Setup
window, the files
will be deleted from the
File Manager
screen after they are transferred.
CAUTION
It is forbidden to connect or disconnect a U disk or a USB printer during the transmission
course.
9.2 Exporting Files
1.
Connect the U disk recommended by the manufacturer to the electrocardiograph.
2.
Select
DAT/SCP/FDA-XML/PDF/DICOM
from the
File Format
list box in the
File Setup
window.
3.
Select
Export All
on the
File Manager
screen1 to export all the files to the directory of
ECGDATA\ECG-X\Export\Export Date and Time
of the U disk.
理邦保密文件
EDAN CONFIDENTIAL
