SE-1200 Series Electrocardiograph User Manual Transmitting ECG Data
- 66 -
3.
Set
Auto Transmission
to
On
and
Transmission Mode
to
UART
in the
Transmission Setup
window.
4.
Log into the DMS.
5.
In the auto or rhythm mode, ECG data will be transmitted through the serial cable
automatically after an ECG report is printed out.
7.1.2 Transmitting ECG Data in DAT and DAT V1.03 Format
Through Ethernet Cable
1.
Log into the DMS.
2.
Connect the electrocardiograph to the PC with an Ethernet cable recommended by the
manufacturer.
3.
Configure the
Transmission Setup
window.
NOTE:
For more information on configuring network settings, consult your Network
Administrator.
For Ethernet Transmission:
1)
Press
Shift
+
F1
in the
Transmission Setup
window to open the
Basic Setup
window.
2)
Set
Auto Transmission
to
On
and
Transmission Mode
to
Wired
.
3)
Set the
Server IP
item to the IP of the PC.
For details, please refer to Section 10.6.1 "Basic Setup".
4)
Press
Enter
to confirm, and then press
Esc
to return to the main screen.
For Wireless Network Transmission:
1)
Press
Shift
+
F1
in the
Transmission Setup
window to open the
Basic Setup
window.
2)
Set
Auto Transmission
to
On
and
Transmission Mode
to
Wireless
.
3)
Set the
Server IP
item to the IP of the PC.
For details, please refer to Section 10.6.1 "Basic Setup".
4)
Press
Shift+F2
in the
Transmission Setup
window to open the
WIFI Setup
window.
For details, please refer to Section 10.6.2 "WIFI Setup".
5)
Connect the wireless network.
4.
Set
File Format
to
DAT
in the
File Setup
window.
5.
In the auto or rhythm mode, ECG data will be transmitted through the network automatically
after an ECG report is printed out.
理邦保密文件
EDAN CONFIDENTIAL