SE-1200 Series Electrocardiograph User Manual Entering Patient Information
- 49 -
Race
Patient Race (unknown/ Oriental/ Caucasian/ Black/ Indian/ Mongolian/
Hispanic/ Asian/ Pacific/ Chinese/ Malay/ other)
Pacemaker
Select
Yes
to detect very small pacemaker pulses. However, when
Pacemaker
is set to
Yes
, the system is very sensitive, and should not be
close to equipment emitting high frequency radiation. High frequency
radiation can interfere with pacemaker pulse detection and normal ECG
acquisition.
NOTE: Pacemaker
is recommended to be set to
No
unless it is
known that the majority of the electrocardiograph usage
will be on patients with pacemakers.
NOTE:
The total number of supported characters may be fewer if special Latin characters
are entered.
5.2 Entering Patient Information by Using a Reader (Optional)
Operation procedures are as follows:
1.
Configure the bar code
For more detailed information about configuring the bar code, please contact the
manufacturer or the local distributor.
2.
Connect the bar code/social security card/ID card reader to USB socket 2 on the right panel
of the electrocardiograph.
3.
When the main screen is displayed, scan the patient’s bar code with the bar code/social
security card/ID card reader, and then the patient information will appear in the
corresponding box.
NOTE:
Recommended social security card reader: T6-ULD-I, USB socket;
Recommended ID card reader: GTICR100-02, USB socket.
5.3 Entering Patient Information by Acquiring Orders
NOTE:
To use the order function, the ECG data management software (DMS) of the
manufacturer must be installed in the PC..
Operation procedures are as follows:
1.
Connect the electrocardiograph to the PC with Ethernet cable recommended by the
manufacturer.
2.
Log into the DMS.
3.
Set
Remote IP
,
Local IP
,
Gateway
and
Subnet Mask
in the
Transmission Setup
window.
理邦保密文件
EDAN CONFIDENTIAL