SE-1200 Series Electrocardiograph User Manual System Setup
- 89 -
2. For details of the ECG report printed by the USB printer, please
refer to 6.5.2, “ECG Reports Printed by the USB Printer”.
3. USB printing is ineffective in the auto periodic sampling mode,
VCG mode,, manual mode and R-R analysis mode.
4. Make sure that paper is installed in the USB printer before
printing. Error may occur if no paper is loaded in the USB
Printer.
Print Out
(Only available
in the auto and
rhythm modes)
Choose from:
On
or
Off
Select
On
,
the ECG report can be printed out by pressing the
PRINT/STOP
key.
Select
Off
, the ECG report can be saved, but cannot be printed out by
pressing the
PRINT/STOP
key.
Speed
Choose from:
5mm/s
,
6.25mm/s
,
10mm/s
,
12.5mm/s
,
25mm/s
or
50mm/s
In the manual mode, select
5mm/s
,
6.25mm/s
,
10mm/s
,
12.5mm/s
,
25mm/s
or
50mm/s
.
Only
25mm/s
and
50mm/s
are available in the auto, rhythm and VCG
(only configurable for SE-1200 Express) modes.
Only
25mm/s
is available in the R-R analysis mode.
Paper Marker
Paper Marker
is used to identify the start point of each page of the
recorder paper.
Choose from:
Yes
or
No
Select
Yes
if the paper with black markers on the bottom is used, and the
device can identify the start point of each page of the recorder paper while
printing ECG reports.
Sample Time
Choose from: 10s, 20s, 30s, 40s, 50, 60s
NOTE:
If the time period is longer than 10s, the ECG data sampled
will be stored, and the specified part of data will be
analyzed.
10.4.2 Setup 2
Press
F2
to switch to the
Setup 2
window.
理邦保密文件
EDAN CONFIDENTIAL
