SE-1200 Series Electrocardiograph User Manual FAQ
- 106 -
Chapter 12 FAQ
1. Operating Problems
Q1: I was trying to select a file from the file list on the
File Manage
screen, but the file was in
the middle of the long list. Is there any way to make the selection faster?
A1: Actually, the system provides a method for fast moving: pressing
Shift
+
Up
or
Down
arrow
can move the cursor up or down in the file list very fast.
Q2: I was just about to input the age when I suddenly realized that I had entered the
Name
textbox unintentionally, can I just go back without pressing
Tab
for a whole circle?
A2: As a matter of fact, the system does take such unintentionalities into consideration by
providing
Shift
+
Tab
as the way back, as the Microsoft Windows operating system does.
Q3: I want to save the ECG data without printing, could it be possible?
A3: Yes, you can set
Print Out
to
Off
in the
Record Info Setup1
window. Or, in the auto or
rhythm mode, you can directly press
Shift
+
PRINT/STOP
to enable or disable the print out
function. The ECG data will be collected and saved without printing. In the same way, if the
transmission settings are configured, the ECG data could be transmitted to the PC without
printing.
Q4: The screen of SE-1200 electrocardiograph is too shiny. Could it be possible to weaken the
brightness of the screen?
A4: There is a setup item named brightness in the
Display & Sound Setup
window, you can
press the
Left
or
Right
arrow to change the value, which would lead to the change of the
brightness of the screen, please refer to Section 10.8, “Display & Sound Setup”.
Q5: I want to input the patients’ phone number in the
Patient Information
window, but there is
no such item. Can I add it manually?
A5: Yes, there is a user-defined item for entering patient information. It works in this way: first
input the name of the item in the
User-defined
textbox in the
Patient Information Setup
window, e.g. Tel. Then return to the main screen1, and open the
Patient Information
window,
the
Tel
item will be displayed in this window. Now it’s possible to input the phone number of
the patient in the
Tel
textbox. For details, please refer to Section 10.5 “Patient Information
Setup” and Section 4.1.2 “Entering Data”.
Q6:
Memory Full
is displayed on the main screen; Or, the hint
Memory full! Replace the earliest
理邦保密文件
EDAN CONFIDENTIAL
