manualshive.com logo in svg

Eaton Rapid Link 5, Manual, Page: 168 / 249

Share
Download
Eaton Rapid Link 5 Manual Download Page 168

7 Parameterization

7.3 Configure parameters using an app

164

Rapid Link 5 · RAMO5 · RASP5

05/20 MN034004EN

www.eaton.com

7.3 Configure parameters using an app

Figure 102:

Configure parameters using an app

A change of the parameter values requires a connection with the RJ45 
socket. This is provided under the front locking screw.

￫

The parameters can be displayed using Bluetooth (DX-COM-
STICK-KIT), for example.
The components listed here are not included as standard 
(optional accessories). 

￫

For more information on configuring parameters using the app, 
please visit the Eaton Download Center.

www.eaton.eu 

→

 Customer Support 

→

 

Download Center 

- Documentation

Enter the search string AP040189 in the 

Quick search

 field and 

click on 

Search

.

Summary of Contents for Rapid Link 5


























































































































































































































































Reviews:

No comments