manualshive.com logo in svg

Eaton Rapid Link 5, Manual, Page: 124 / 249

Share
Download
Eaton Rapid Link 5 Manual Download Page 124

4 Operation

4.3 Manual control

120

Rapid Link 5 · RAMO5 · RASP5

05/20 MN034004EN

www.eaton.com

On RAMO5-W… (reversing switch) and RASP5 (speed controller) 
Rapid Link 5 modules, the required rotating field direction can be selected 
when the selector switch is in Manual mode:

•

FWD = Forward. Clockwise rotating field enable 
(L1

→

U, L2

→

V, L3

→

W)

•

REV = Reverse. Anticlockwise rotating field enable 
(L1

→

W, L2

→

V, L3

→

U)

Figure 74:

Direction of rotating field

The selected and enabled rotating field direction is indicated by the green 

FWD

 and 

REV

 LEDs. The selector switch for the rotating field direction has 

three positions.

When the switch is in the OFF position, the Rapid Link 5 modules are locked 
in Manual mode.

￫

The selector switch for the direction of rotating field maintained 
in all positions.

REV

FWD

OFF

Summary of Contents for Rapid Link 5


























































































































































































































































Reviews:

No comments