4 Commissioning
4.12 Acyclic data
DX-NET-PROFINET2-2
01/22 MN040062EN
www.eaton.com
85
PNU840.29952 = 2, = 3 or = 4 (stop with error)
In this case, bit 10 must be set with the error reset command. If not, the
reset will not be carried out.
In the event of an internal error in the variable frequency drive/variable speed
starter, the normal error reaction is executed.
In the error-free state, communication takes place between the basic device,
interface and PLC (
gure 35). In the event of an error, the variable fre-
quency drive/variable speed starter continues to run, regardless of which
communication path is interrupted.
