Eaton DX-NET-PROFINET2-2, Manual

Page: 70 / 133

4 Commissioning
4.12 Acyclic data
DX-NET-PROFINET2-2 01/22 MN040062EN www.eaton.com
67
240 0 – – STOP rw U16 LoadInertiaFactor Load inertia factor
241 0 – – STOP rw U16 Overvoltage current limit Overvoltage current limit
250 0 P00-29 P00-20 STOP ro UInt8 FrameSize Used to specify the basic device's size
1 P00-29 P00-20 STOP ro UInt8 NoOfInputPhases The number of input phases for the basic
device
2 P00-29 P00-20 STOP ro UInt8 kW/HP 1: kW
2: HP
251 0 P00-29 P00-20 STOP ro U32 Device voltage Device input voltage
Value in volts
252 0 P00-29 P00-20 STOP ro U16 Power@Ue 18500
≙
18.50
253 0 – – STOP ro OptionID0 Module identification code
255 0 P-60 – STOP rw U16 Motor control mode Used to select the motor control mode.
257 0 – – STOP ro OptionSignature Field bus module code
260 0 P-16 P-16 RUN rw U16 AI1 signal range Signal range for analog input,
value range between 0 and 7.
For more information, please refer to the
manual for the basic device.
1 P-47 - RUN rw U16 AI2 signal range Signal range for analog input, value range
between 0 and 7.
For more information, please refer to the
manual for the basic device.
261 0 P-35 P-17 RUN rw U16 AI1 Gain Analog input scaling
Output value = Input value * Scaling.
100
≙
10.0 %
1 – – RUN rw U16 AI2 Gain 100
≙
10.0 %
262 0 P-39 P-44 RUN rw U16 AI1 Offset 300
≙
30.0 %
1 – – RUN rw S16 AI2 offset 300
≙
30.0 %
267 0 – P-18 RUN rw AI1 Invert If this parameter is set to 1, the analog input
will be inverted.
273 0 – – RUN rw U16 AO1 SignalFormat Analog output 1 format
1 – – RUN rw U16 AO2 SignalFormat Analog output 2 format
274 0 – – RUN rw U16 AO1 scale Scaling for analog output 1
275 0 – – RUN rw S16 AO1 Offset Offset for analog output 1
281 0 P-63
310 0 ✓ ✓ STOP ro UInt16 UsedStateMachine 0: Communication lost
10: PROFIdrive profile
11: 8-bit profile
311 0
PNU PNU Parameter
number Access right Data type Name Description
Index Sub-
index DC1 DE1 RUN/
STOP ro/rw