Eaton DX-NET-PROFINET2-2, Manual

Page: 68 / 133

4 Commissioning
4.12 Acyclic data
DX-NET-PROFINET2-2 01/22 MN040062EN www.eaton.com
65
27 0 P-11 P-11 STOP rw U16 V-Boost Motor voltage boost at low output frequen-
cies in order to improve the starting torque
and runout characteristics at low speeds.
100
≙
10 %
The setting range will depend on the device
type.
28 0 – – STOP rw U16 F-boost Only available on single phase DC1.
28 1 – STOP rw f-HoistBoost Speed increase for hoisting gear
29 kg 0 – – STOP rw U16 t-Boost Only available on single phase DC1.
30 0 – – STOP rw U16 M-Min Motoring Minimum torque
1 – – STOP rw U16 M-Max Motoring Maximum torque (motor)
31 1 – – STOP rw U16 M-Max Generative Maximum torque (generator)
32 0 – – STOP rw U16 Torque Boost Torque boost
33 0 – – STOP rw U16 Torque boost f-limit Maximum frequency for torque boost
34 0 – – STOP rw U16 Freq RefMax Input frequency at maximum speed
111 0 P-03 P-03 RUN rw T2 t-acc Sets the acceleration ramp time in seconds
The time set here is the time for accelerating
from a latching to the rated motor frequency
set in P-09.
300
≙
3.00 s
3 – – RUN rw t-accNetwork Ramp time via field bus.
114 0 P-04 P-04 RUN rw T2 t-dec Sets the deceleration ramp time in seconds.
The time set here is the time for decelerating
from the motor's rated frequency to a full
stop.
300
≙
3.00 s
116 0 P-24 – RUN rw U16 t-QuickDec Quick Stop Ramp
In default the second deceleration ramp is
activated by applying voltage to DI1 and DI2
(terminals 2 and 3) at the same time.
250
≙
2.50 s
120 1 – – RUN rw U16 t-accMulti1 Acceleration ramp 2
2 – – RUN rw U16 t-accMulti2 Acceleration ramp 3
3 – – RUN rw U16 t-accMulti3 Acceleration ramp 4
121 1 – – RUN rw U16 n-accMulti1 Ramp 1-2 speed limit
2 – – RUN rw U16 n-accMulti2 Ramp 2-3 speed limit
3 – – RUN rw U16 n-accMulti3 Ramp 3-4 speed limit
122 1 – – RUN rw U16 t-decMulti1 Deceleration ramp 2
2 – – RUN rw U16 t-decMulti2 Deceleration ramp 3
3 – – RUN rw U16 t-decMulti3 Deceleration ramp 4
123 1 – – RUN rw U16 n-decMulti1 Ramp 2-1 speed limit
2 – – RUN rw U16 n-decMulti2 Ramp 3-2 speed limit
3 – – RUN rw U16 n-decMulti3 Ramp 4-3 speed limit
PNU PNU Parameter
number Access right Data type Name Description
Index Sub-
index DC1 DE1 RUN/
STOP ro/rw