Eaton DX-NET-PROFINET2-2, Manual

Page: 69 / 133

4 Commissioning
4.12 Acyclic data
66
DX-NET-PROFINET2-2 01/22 MN040062EN www.eaton.com
150 0 – – RUN rw U16 ZeroSpeedHoldTime Holding time for speed of zero
202 0 P00-29 P00-20 STOP ro U16 DeviceType String: e.g., "DC1"
203 0 ✓ ✓ STOP ro UInt16 HW Version Device Variable frequency drive hardware version
1 ✓ ✓ STOP ro UInt16 HW Version Interface Hardware version of the interface
206 0 P00-28 P00-18 STOP ro S16 System Version 103
≙
1.03
1 P00-28 P00-18 STOP ro U16 Application version 103
≙
1.03
207 0 P00-50 - STOP ro System Software Version
1 P00-50 - STOP ro Application software
version
209 0 P00-30 P00-19 STOP ro Octet[11] Serial number 11 byte ASCII code
1 – – STOP ro Octet[11] Serial number A
2 – – STOP ro Octet[11] Serial number B
3 – – STOP ro Octet[11] Serial number C
4 – – STOP ro Octet[11] Serial number D
210 0 P-08 P-08 STOP rw U16 Motor nom current By setting the "Motor Nom Current" in the
drive, the motor overload protection is confi-
gured to match the motor rating.
The maximum value will depend on the basic
device and is always specified with one
decimal place.
Example: 14
≙
1.4 A
211 0 P-07 P-07 STOP rw U16 Motor rated voltage Used to define the motor's rated operating
voltage, e.g., the voltage on the motor when
it is running at the rated frequency.
Details in Volt
215 0 – – STOP rw U16 Motor PF
216 0 P-09 P-09 - rw U16 Motor rated frequency The rated frequency of the motor.
This is the frequency at which ”Motor Nom
Voltage” is applied to the motor. Details in
Hz
217 0 P-10 P-10 STOP rw U16 Motor rated speed Details in rpm
218 0 P-64 P-46 STOP rw U16 Stator resistance Motor stator resistance
219 0 P-65 – STOP rw U16 Stator inductance Motor leakage inductance (d)
220 0 P-66 – STOP rw U16 Stator inductancePM Motor leakage inductance (q)
221 0 – – STOP rw U16 Rotor resistance Rotor resistance
223 0 – – STOP rw U16 Excitation current @M=0 Motor magnetizing current
224 0 – – STOP rw U16 Air gap inductance Motor leakage factor
226 0 – – STOP ro Mutual inductance Stator resistance (Rs)
227 0 – – STOP ro Stator resistance Meas Stator inductance
228 0 – – STOP ro Stator inductance Meas Rotor resistance
230 0 – – STOP rw PM-MotorSignalIn Enable signal injection
231 0 – – STOP rw PM-MotorSignalInLevel Signal injection level
PNU PNU Parameter
number Access right Data type Name Description
Index Sub-
index DC1 DE1 RUN/
STOP ro/rw