4 Commissioning
4.1 GSDML file
DX-NET-PROFINET2-2
01/22 MN040062EN
www.eaton.com
25
4 Commissioning
4.1 GSDML file
The properties of a PROFINET card are described in a GSDML file.
This is required in order to integrate the DX-NET-PROFINET2-2 communica-
tion interface into a PROFINET network.
￫
First, carry out all the measures for commissioning the variable
frequency drive or variable speed starter as described in the
relevant manual for the device.
￫
Check the settings and installations for the switching on the
PROFINET communication system that are described in this
manual.
ATTENTION
Ensure that no danger will be caused by starting the motor.
Disconnect the driven machine if there is a danger in an incor-
rect operating state.
￫
You will find a suitable GSDML file on the Internet at:
Eaton.eu
￫
Customer Support
￫
Download Center – Software
Enter the search term “GSDML”.
