1 Series
1.2 Type code
8
DX-NET-PROFINET2-2
01/22 MN040062EN
www.eaton.com
1.2 Type code
The type code and type designation of the DX-NET-PROFINET2-2 communi-
cation interface are structured as follows:
Figure 2:
Catalog number selection of field bus interface card DX-NET-…
1.3 General rated operational data
D X - N E T - P R O F I N E T 2 - 2
2 = 2 slots
PROFINET interface for DC1 or DE1
Net (= Network)
DX = Unit
(Accessories for the variable speed starters/
variable frequency drives of the PowerXL
series)
Technical data
Value
General information
The variable frequency drive/variable speed starter complies with the
EMC standard EN 61800-3:20218
Installation
In RJ45 slot on the drive
Degree of protection
IP20
Connections
RJ45 plug for variable frequency drive/variable speed starter, RJ45 plug
for Ethernet
Power supply
20–28 V DC, 24 V DC 110 mA
Ethernet connection
Compatible devices
Devices according to Ethernet standards IEEE 802.3 and IEEE 802.3u
Media
10BASE-TX or 100Base-TX with auto-negotiation and auto-MDIX
(auto-crossover)
Cabling
CAT5 UTP, CAT6 UTP
CAT5 FTP, CAT6 FTP
CAT5 STP, CAT6 STP
Terminals
RJ45
Termination
internal
Maximum segment length
100 m
Topology
Star or bus
Maximum number of nodes allowed
255
Data transfer rate
10 Mbps or 100 Mbps
Protocol
PROFINET IO
