Description
2-3
1
2
3
4
5
2.2.1.1
Front panel
The front panel of the rack has:
• The following extractible modules:
- 1 primary (Plate 6.IV) mains (item 1) or DC (item 6) convertor with “I/O” switch
(item 2 or 9) and supervision LED (items 4 and 5 or 7, 8 and 11),
- 1 3G PA-TRX module (item 17),
- 1 or 2 duplexers (antenna diversity option) (items 14 and 12),
- 1 RF power divider (item 16).
• supervision LEDs:
- "LOCAL" dial (item 5):
X
yellow EXT. LED (item 4): lit if the IDR IDO 3G is in slave mode,
X
Green PWR LED (item 3): indicating the power supply to the synchronisation
board.
- "ALARM" dial (item 8):
X
Red LED (item 10): indicating a problem on the fan plate,
X
Red SYBC LED (item 11): indicating a fault on the synchronisation board.
• 2 carrying handles (item 18),
• 1 "ALARM" loop connector (item 9),
• 1 clear protective cover (see Plate 6.I, item 13).
2.2.1.2
Rear panel
The rear panel of the rack has:
• 1 removable fan plate (item 16) secured by 2 captive screws (item 15),
• 1 M5 stud (item 17) to connect the chassis to the earth.
