Duplo DP-S Series, Service Manual

Page: 108 / 298

107
x
Scanner Section
chap.3
(7) Removal of Slider B
¡
Required items : Wire fixing tools
1.
Perform steps
1
through
3
of procedure (4).
2.
To prevent loosening of the wire, attach 2 wire
fixing tools, one before and one after the wire pulley.
Do not remove the wire fixing tools
before Slider B is attached.
IMPORTANT :
Reinstallation
2.
Place the wire on the pulley, both before and
after.
\
See page 136
¡
Required items
Slider B attachment tool
2 Set screws
3.
Place the wire on the spring, both before and
after.
4.
Move the slider B to align the slider B back
face with the slider B attachment tool face.
1.
Set the slider B attachment tool and attach the
2 set screws.
5.
Remove the Wire fixing tools.
3.
Remove the wire from the spring, in 2 locations
before and after the spring.
4.
Remove Slider B.
R8S03027
Attach the
spring
Fix the wire with the tool
R8S03028a
Slider B
R8S03029a
R8S03030
Fix the wire with the tool
Slider B attachment tool
Screw
Slider B
Screw
Alignment
Misalignment between
the back and the front
Adjust
Adjust
Slider B back face
Attach-
ment tool
6.
Remove the slider B attachment tool.
¡
If the slider B back face is misaligned with
the slider B attachment tool face between the
back and the front,
a a
Adjust the position of the wire screw.