Page 85
Dukane Manual Part No. 403-587-00
Section 5 - Operation
Current Setup
While viewing the
Operate
screen, (or from the
Main
Menu
), press the soft key next to
Current Setup
, and a
view similar to the one shown in Figure 5-64 will appear.
This is usually a multiple page (display) list of the main
parameters that were set for the current setup.
Real Time Data
See Figure 5-66.
Press the soft key next to
Real Time Data
, and the display
changes to show press characteristics for the current setup
and weld cycle.
The possible characteristics are:
Force, Distance, Power,
Frequency,
and
Speed
.
Characteristics displayed depend on system configuration.
Process Limits
Press the soft key next to
Process Limits
, and the process
limits list, similar to the one shown in Figure 5-65 is dis-
played. Adjustments to the list of process characteristics
can be made easily.
Press
Back
when finished making adjustments to the list of
process characteristics, and once again the main
Operate
screen will be shown.
Figure 5–66
Real Time Data
Figure 5–65
A Process Limits List
Figure 5–64
Current Setup
