Other Control
Functions
Other control functions - such as monitoring the weld-
ing process and controlling the system are accomplished
using:
• the
iQ
Ultrasonic Generator/Power Supply ES,
with color display, or
• the
iQ
HMI (or a computer) and Dukane's
iQ
Explorer II
software.
Stopping the Weld
Cycle
Normal Conditions
The cycle stops when the programmed welding cycle ends
or when the rear panel's
Cycle Stop
input is activated.
Emergency Conditions
1. Press the rear panel AC breaker/switch to
OFF
.
2. The front panel power light will go out.
This means the generator's power has been turned off.
Figure 6-1
iQ Explorer II
, Keyboard and
Numeric Pad
Software Support
Features
Two support features in-
corporated into your
iQ
Explorer II
software are its
virtual numeric pad/key-
board and its help system.
Numeric Pad and Keyboard
NOTE
iQ
Explorer II
provides a touch screen
numeric pad and a keyboard for easy
parameter entry.
Select
for the keyboard.
Select
for the numeric pad.
See Figure 6-1 below.
Page 97
Dukane Manual Part No. 403-587-00
Section 6 - Optional Control
