| 67
4F Tutorial: How to Setup a Print and Cut using PTCreate Pro – Contour Cut
This tutorial will walk you through the basic steps to print and cut a label using the trace image / contour
cut feature found in the Professional version of PTCreate.
4F.1 Choosing a Label Size (Page Layout)
1. Choose New Project…
2. Set your page size. Since all die cutting media is 4.25” wide the standard maximum width is
automatically set to 4.25. In this example we have set the size to 4.25 x 4.25 to accommodate
approximately a 4” x 4” label.
Tip!
Set your page larger than the label size
to be cut. This will allow you to create a
bleed around the label so that you always
cut inside your print and get perfect cut
every time.
Summary of Contents for LX610e
Page 71: ... 71 5 Center the image horizontally and vertically to the Page ...
Page 88: ...88 1 Choose Start a new BarTender document ...
Page 89: ... 89 2 Select Blank Template Click Next 3 Select Color Label 610e Click Next ...
Page 109: ... 109 4 Prepare items needed for procedure 5 Soak the paper towels in water for 5 seconds ...
