| 33
Adjusting Knife Pressure over time.
Eventually, the knife blade will begin to wear and require more cut pressure to cut at the same depth as
when it was brand new and sharper. Therefore, you may need to add cut pressure when cutting any media
even the High Gloss Paper.
To determine if cut pressure needs to be increased or decreased, follow these steps.
1. 1. Print and Cut 1 copy and then attempt to peel the label from the liner.
2. Check for tear. If the label tears when you remove it, you will need to increase the cut pressure.
Increase pressure in small increments to avoid over compensating and cutting through the liner.
3. Check the liner. Once you peel up the label, check the liner. If it has been cut through, decrease
pressure.
4. Continue increasing or decreasing pressure until the label no longer tears when removed or
the liner is not cut through.
Summary of Contents for LX610e
Page 71: ... 71 5 Center the image horizontally and vertically to the Page ...
Page 88: ...88 1 Choose Start a new BarTender document ...
Page 89: ... 89 2 Select Blank Template Click Next 3 Select Color Label 610e Click Next ...
Page 109: ... 109 4 Prepare items needed for procedure 5 Soak the paper towels in water for 5 seconds ...
