| 61
4E: Tutorial: How to Setup a Print and Cut using PTCreate Pro – Vector File Cut
If you have a designer that is able to use an advanced program like Adobe Illustrator or Corel Draw, you can
save your print file and cut file together as a multi-layer vector file in AI, EPS, or SVG format.
You can then import them into PTCreate and designate which layer will be the cut and which will be the
print. This will allow you to create complex cuts in exactly the right shape and exactly the right position.
This method is the best way to get the highest quality print and cut. While tracing the image using the steps
in the previous section will allow you to create the same shapes, you can save time and create a smoother
cut file using this method.
Cut Layer
Print Layer
Important Note:
Before you start with PTCreate, your designer should create the print and cut line
togetherand save them as two separate layers in the same file. You’ll be able to see these layers when you
import the file into PTCreate.
Summary of Contents for LX610e
Page 71: ... 71 5 Center the image horizontally and vertically to the Page ...
Page 88: ...88 1 Choose Start a new BarTender document ...
Page 89: ... 89 2 Select Blank Template Click Next 3 Select Color Label 610e Click Next ...
Page 109: ... 109 4 Prepare items needed for procedure 5 Soak the paper towels in water for 5 seconds ...
