| 57
4D.3 Add a Cut file
In PTCreate Standard you can either draw a box in the approximate location of the cut file or use one of the
preset size from the library. If you have a rectangular label or you would like to add a corner radius to your
cut it is preferable to draw the cut line. Corner radius make it easier toremove your label from the liner. In
this example we will draw the cut line.
1. RIGHT CLICK on the rectangle icon and choose Rounded Rectangle.
2. Before you start to draw the cut line, adjust the corner radius. You will not be able to change this
after you draw your cut line. The corner radius is the amount of curve around the corners. .125 in
(1/8 Inch) is the standard corner radius.
Summary of Contents for LX610e
Page 71: ... 71 5 Center the image horizontally and vertically to the Page ...
Page 88: ...88 1 Choose Start a new BarTender document ...
Page 89: ... 89 2 Select Blank Template Click Next 3 Select Color Label 610e Click Next ...
Page 109: ... 109 4 Prepare items needed for procedure 5 Soak the paper towels in water for 5 seconds ...
