DTM Print LX610e, Color Label Printer

Page: 5 / 114

| 5
THANK YOU…
...for choosing an LX610e Color Label Printer. The LX610e Printer will print razor-sharp text and barcodes, vibrant colors, and even
stunning photo-realistic photographs directly onto rolls of labels, card stock and a variety of other approved media. AND with the
built in digital die cutter you can cut and create your labels in any size or shape you choose.
This User’s Manual is your complete step-by-step guide to quickly and easily setting up and printing with your new Color Label
Printer!
1A Choosing a Good Location
—
Place the printer on a flat surface in a location with adequate air circulation to prevent internal heat buildup.
—
Do not place the printer near heat sources such as radiators or air ducts, or in a place subject to direct sun
light, excessive dust, mechanical vibration or shock.
—
Allow for adequate clearance in front of the printer to accommodate the printed label stock as it is leaving
the printer to avoid the possibility of binding or jamming of the label stock.
—
Allow for 6” of clearance behind the printer to accommodate loop creation during cutting operations. The
area directly behind the printer must also not be obstructed by USB or power cables connected to the
printer.
—
Allow for adequate overhead clearance for opening the top cover to allow easy access to the labels tock
and ink cartridge. The printer will require 7 inches (17.78 cm) of additional space on the top side to completely
open the cover (Total = 16.5” or 41.91 cm).
Section 1: Getting Started