21
Note
Default username and password works only with factory reset/deep reset Wi-Q Gateway.
User need to change the pass word on a factory reset Gateway for security reasons.
Default Username: admin
Default Password: password
6 Once logged in, click on the ‘Survey Mode’ button in the upper right corner of the
Gateway webpage.
7 Click on the ‘Standalone Survey’ button to perform a Site Survey without an ACS.
Note
After Standalone Survey Mode is enabled, the Web UI will be logged out. You
must then log back in and return to the Survey Mode page to perform Standalone
Survey Mode operations.
8 The ‘Current Sign-on Key’ field will fill with a 6-dig it sign-on key (987654) to sign a
demo reader onto the Gateway.
9 Noting the Gateway’s sign-on key, sign on the Wi-Q Con troller(s) with a keypad.
On the keypad enter 5 -6 -7 -8 - # immediately fol lowed by the 6-digit sign-on
key in the segment tab.
The LED’s on the WDC will alternate red, green and blue. If the sign-on is a
success, there will be 3 green LED’s accompanied by 3 tones that go up in pitch.
If the sign-on is unsuccessful, there will be 3 red LED’s with 3 tones that go
down in pitch.
10 Click on ‘Start log’ button to start the logging the signal strength.
Summary of Contents for BEST Wi-Q ONGUARD
