23
Figure 5 Packet Transfer Ratio
Packet Transfer Ratio
It is recommended that the packet transfer ratio rate is 80% or better. This value indicates how
efficient the communication is between the readers and the Wi-Q Gateway as well as how
much interference maybe in the area. If this value is below 80%, the reader will not receive
all the configuration data. To verify the Wi-Q Gateway packet transfer ratio, update the
reader statistics to poll every 10 seconds instead of once a day while running the survey
tool in the Wi-Q Gateway.
It is imperative to consider the wireless environment and the placement of the Gateway
and its antennas during planning. The Gateway communicates on the 2.4 GHz frequency
using the ZigBee channels. If the location has other wireless devices or networking
using the 2.4 frequency, please orient the antennas away from these devices to manage
interference. It may be required to work with local personnel to manage the wireless
environment to prevent causing interference with other Wi-Fi installations and products.
Note
You will need to test signal strength at all door locations near the perimeter of
the coverage area as well as any location where a physical obstruction may cause
interference. You can test the range and signal quality by using the built in survey mode in
the Wi-Q Gateway model Wi-Q gateway.
Summary of Contents for BEST Wi-Q ONGUARD
