22
The Wi-Q Gateway will begin logging the gateway packet transfer ratio, the reader packet
transfer ratio as well as the signal strength at the gateway and the reader.
Figure 4 Portal Signal Strength
Portal Signal Strength
The Portal RSSI value indicates how well the Wi-Q Gateway receives signal from the door
controller and should be -75dB or better. The Survey Mode charts in the Wi-Q Gateway denotes
the lowest limit by the blue dashed line in the Signal Strength chart. If the Portal RSSI value is
below the limit, please reposition the Gateway or the antennas to improve signal strength. It
may also be possible that another Wi-Q Gateway is required for adequate coverage.
Reader Signal Strength
The Reader RSSI value indicates how well the reader is receiving signal from the Wi-Q
Gateway and should be at least -65dB or better denoted on the chart with the red dashed line.
If the Reader RSSI value is below the recommended limit check the reader antenna and the
gray antenna jumper cable to verify there is not damage to them. Also, it may be required that
the Wi-Q Gateway or the antennas need to be repositioned so the reader can hear the Wi-Q
Gateway more clearly.
Summary of Contents for BEST Wi-Q ONGUARD
