V_1.OM.000160.DRM
Page 70
Version 5.0
Doremi Labs, Inc.
13.1.2.4 Recording in A-Time Mode
To record in A-Time without using the Source Time-Code:
•
Select “A Time” in the Time Code Mode menu (MENU (2))
•
Press the
REC
button only to set the V1-HD in EE mode (Displays the video on the
input).
•
If you see a valid video signal on your monitor, press
REC
and
PLAY
at the same time
to start recording.
•
Press
STOP
to finish the recording.
Note: the V1 will record at the current position or at the end of file depending on the “Rec at:”
setting in OPTION MENU (01) “Transport”.
13.2 3D using the Dual-Pass Method
This method of recording requires that the Left-Eye and the Right-Eye to be recorded separately
in the same file. The audio should be recorded with the Left-Eye.
The Left-Eye time-line placement should be before that of the Right-Eye.
The Left-Eye and the Right-Eye are to be synchronized later using a visual marker and it is up
to the user to identify the proper sync points of the two recordings.
13.2.1 Creating the Recording File
Start the process by creating a file with the desired format. The bit rate of the file should not
exceed 100Mb/s.
Go to OPTION MENU (03) - New Record Set
•
Select the format.
•
Select Frame Rate.
•
Select 100Mb/s.
•
Select Single Video.
•
Select 4-2-2.
•
Select the number of Audio Tracks.
•
Select Drop or Non Drop Frame.
•
Select V1 Encoding.
•
Select 16-bit Audio.
•
Select Standard VANC.
•
Select 10b Precision.
To create the recording file:
•
Hold the OPTION key and press SAVE.
•
Press Enter to create the file.
