V_1.OM.000160.DRM
Page 64
Version 5.0
Doremi Labs, Inc.
12.2.2 Recording the Video-Part
The audio should be recorded with the Video-part:
•
Select “A Time” in the Time Code Mode menu (MENU (02)).
•
Press the
REC
button only to set the V1-HD in EE mode (Displays the video on the
input).
•
If you see a valid video signal on your monitor, press
REC
and
PLAY
at the same time
to start recording. The time-code will start incrementing one the V1-HD is in record.
•
Press
STOP
to finish the recording the Video-part.
12.2.3 Recording the Key-Part
•
Before recording the Key-part: locate to a time code location beyond the end of the
recorded video (Example: if the Video-part starts at 00:00:00:00 and ends at 00:10:00:00
locate to 01:00:00:00. To locate enter the time code value using the keypad and then
press” Go To”)
•
Press the
REC
button only to set the V1-HD in EE mode (Displays the video on the
input).
•
If you see a valid video signal on your monitor, press
REC
and
PLAY
at the same time
to start recording. The time-code will start incrementing one the V1-HD is in record.
•
Press
STOP
to finish the recording the Key-part.
Note: the V1 will record at the current position or at the end of file depending on the “Rec at:”
setting in OPTION MENU (01) “Transport”. For this operation set the “Rec at: to current position.
