V_1.OM.000160.DRM
Page 57
Version 5.0
Doremi Labs, Inc.
11 Controller Menu
The front panel controls of the V1 are called the “RCV2 controller”. The RCV2 controller
communicates with the V1 via RS-422. The controller has several unique functions. To call up
the CONTROLLER MENU hold the ESCAPE button and press the menu up
×
arrow key (or
down key
Ø
). Use the arrow keys to scroll through the menu selections. The
TOGGLE
button
changes the parameters for the selected menu. Press
TOGGLE
to increase the parameter and
hold
OPTION
and
TOGGLE
to decrease the parameter.
To
disable
the RCV2 and prevent accidental operation, hold the
OPTION
button then press
ESCAPE
. Press again to unlock the RCV2. When the RCV2 is in “disable mode” the letters
“DIS” will be displayed in the top right corner of the 4 lines LCD.
To
reset
the controller (soft reset) hold the
1, 2, 3
or
4
buttons and press
CLEAR
. This may be
necessary to reset the optional Video LCD display if you switch between NTSC & PAL formats.
(00) RCV2 Version
Displays the firmware version number for the RCV2 controller.
(01)
Video
Use the TOGGLE button to switch the front panel LCD monitor
“on” or “off”. Default is “on”
(02) Composite
Out
Switches the composite output on the rear panel “on” or “off”.
Default is “on”.
(03)
Burn In Window
When ON, the burn in window will be enabled on the confidence
LCD monitor (it needs to also be enabled in the OPTION MENU
setting). - Default is “on”.
(Always active on LCD monitor and on composite output)
(04) Delay
Mode
Configure for single drive operation (V1-HD with independent
record and play option only)
This is used for broadcast delay to define the time delay between
the recorder and the player(s). Ensure that the V1 is not recording.
Select the player (channel 2) and enter the delay time desired and
press ENTER. The record and play channel will locate to 0 time
code, the recorder will start recording and the player will wait for
the time set for delay to elapse, and will then start playing back
automatically.
The transport controls on the player (channel 2) will be disabled
when the time delay function is engaged. To stop the delay
function select the recorder (channel 2) and press STOP. Turn the
delay mode to off if already engaged.
Default is “off”.
(05)
Preroll
Used in conjunction with Slomo Mode (See below). When a time
value is entered the RCV2 identifies the pre-roll time from the
location point. This helps to compensate for the delay between the
action being recorded and the push of the save button.
