V_1.OM.000160.DRM
Page 24
Version 5.0
Doremi Labs, Inc.
OPTION
+
ESC
Holding the
OPTON
button and pressing
ESC
will disable/enable
the front panel controls of the V1. “DIS” will appear in the upper
right corner of the LCD when the front panel controls are disabled.
OPTION
+
IN
Holding the
OPTION
button and pressing
IN
will create a time
code offset.
JOG/SHUTTLE WHEEL FUNCTIONS:
Activates the following function when lit:
JOG
:
In Jog mode, the rotation of the Internal wheel will generate "Jog"
steps in forward or reverse. Also does the same function as the
--
and the
++
buttons.
SHUTTLE
:
In Shuttle mode, the angle of the external wheel from its initial
position will control the shuttle speed with 7 different values in
each direction:
10%, 20%, 50%, 100%, 200%, 500%, 1000% in
>> or <<.
The value used and the direction (">>", "<<") is displayed on the
bottom line of the LCD during the shuttle operation.
SLO MO
:
Activates the external wheel for slow motion control. The slow
motion is forward only with predefined values of
0%, 3%, 10%,
15%, 20%, 25%, 30%, 40%, 50%, 60%, 65%, 75%, 80%, 87%,
93%, 100%
5.2.3 Transport Controls
Figure 19: Transport Control Buttons
The V1’s standard transport controls include:
REC
Record control button. This button also has other functions
described elsewhere in this manual.
STOP
Stop control button. The stop button will cause the V1 to stop any
transport control (Play, record, rewind, fast forward).
PLAY
Play control button. If the active drive has recorded material,
pressing the PLAY button will start playback from the current
location at normal speed. If the sync source selected is present, a
dot will appear to the left of the PLAY message on the 4 lines LCD
display.
REW
Rewind control button with a speed of 40 times normal. When the
rewind is close to the beginning of the recording, the speed is
slowed down to normal until it reaches the start. Pressing this
button again will increase the speed. There are three speed levels
REW+REW+REW.
REC STOP
PLAY
REW
FF
