V_1.OM.000160.DRM
Page 45
Version 5.0
Doremi Labs, Inc.
9 Menu
The V1 menu includes the most frequently used settings. Call up the V1 menu by pressing the
menu up
×
arrow key (or down key
Ø
). Use the arrow keys to scroll through the menu
selections. The
TOGGLE
button changes the parameters for the selected menu. Press
TOGGLE
increment or change a value and hold
OPTION
and
TOGGLE
to decrease.
(1) Control
This setting emulates the Local/Remote switch found on many Video Tape
Recorders and required by some remote control devices.
Local
For front panel control of the V1
Remote
For control of the V1 by an external edit controller or workstation
via the rear panel RS-422 connectors
(2) Time
Mode
Selects the Time Code source of the V1 during recording.
A Time
Absolute Time, the time code displayed on the V1 front panel and
present on the
TIME CODE OUT
connector during playback or
record is generated internally by the V1. A Time represents the
time elapsed since the start of the recording unless a time code
offset has been set.
For NTSC frame-rates the time code out can be outputted as DF
or NDF depending on the selection in OPTION MENU (17).
During record, the V1 will not check for time code input on the
LTC or the ATC and will record at the current location or at the
End of file depending on the selection in OPTION MENU (1).
Time Code
The time code out is outputted as DF or NDF depending on the
file type creation, if the file is created with DF then the output will
be DF, if the file is created with NDF then the output will be NDF.
In Time Code mode, the DF/NDF selection in OPTION MENU
(17) does not affect the input or the output.
During record the V1 will latch to the time code input on the time
code in connector or to the SDI embedded ATC depending on
the selection in OPTION MENU (17).
The time code input LTC/ATC should match the file’s format
frame-rate. If the time code input is not present or has the wrong
frame rate, a “wrong time code” message will be displayed.
(03)Sync Source
Specifies the sync reference during playback. The V1 is always locked to
the
Input
when recording.
Internal
59.94
The V1 syncs to its own internal clock (NTSC)
Auto-Bilvl
The V1 syncs to the input or to the BiLevel sync source
Input
The V1 syncs to the
VIDEO IN
input.
TriLevel
Sync
The V1 syncs to the input or to the TriLevel sync source
Bilevel
Sync
The V1 syncs to the input or to the BiLevel sync source
