V_1.OM.000160.DRM
Page 39
Version 5.0
Doremi Labs, Inc.
7.6.2 Overdubbing Video and Audio Tracks
To overdub both video and audio on a section of your disk, you need to execute the “Chase
Command” by holding
OPTION
while pressing
PLAY
.
1. Use OPTION MENU (13)
Edit Prst
and select “
Assemble ON
”.
2. Both the source machine and the V1
should be synchronized
to the same reference
(House Sync) and the time code should be fed from the source machine into the TIME
CODE input of the V1.
3. Execute the Chase command by holding down
OPTION
and pressing
PLAY
4. Place the V1 into EE (Input Monitor) by pressing the
REC
button
5. Begin playback of the source machine before the section that you want to overdub. The V1
will begin playing as soon as it sees a time code that matches what is on the current disk.
Wait until the V1 LCD displays PLAY with a black dot, this indicates that the V1 is playing in
sync and chasing the time code from the source machine.
When you reach the point where you want to punch in, hold down
PLAY
and press
REC
to start
recording. Press
PLAY
or
STOP
to stop overdubbing.
7.6.3 Overdubbing/Insert of Video or Audio Only
This feature allows the insert/overdub of selected audio track(s) and/or video on existing
recordings while the other track(s) is monitored at the same time. Since insert mode requires
fast disk drives, it is recommended that you use the fastest drives available.
To use this feature:
1. Use OPTION MENU (13)
Edit Prst
to select which audio track(s) you want to insert.
2. Provide the same House Sync to the source machine and the V1.
3. Connect the time code out from the source machine into the TIME CODE input of the V1.
4. Begin playback of the source machine before the section that you want to insert on the V1.
5. Hold down
OPTION
and press
PLAY
“Chase Command” to engage synchronized playback
with the source, wait until the V1 LCD displays PLAY with a black dot (This indicates that
the V1 is now in sync with the house sync), then hold down
PLAY
and press
REC
. The V1
will record the insert. Then press
STOP
or
PLAY
to end the insert segment procedure.
