V_1.OM.000160.DRM
Page 49
Version 5.0
Doremi Labs, Inc.
10.1 Transport
The Transport settings feature functions that affect the general playback and record operation of
the V1.
Disk Access
This option will allow you to write protect your file. Select between
Play
and
PL-RE
(Play & Record (Default)). When
Play
is selected, you will not be
able to record on the file or initialize the disk.
Frame Mode
Select Frame Mode
ON
,
OFF
or
Play
.
When ON the V1 will stop on a frame and in slow motion it will play frame
by frame.
When OFF the V1 will stop on a field and in slow motion it will play field by
field.
In PLAY, the V1 will stop on a field and in slow motion it will play frame by
frame.
This setting also affects the Step Recording option. For Slow Motion
application, the frame mode must be OFF. When the V1 is in stop (freeze)
mode and Frame Mode is set to ON a full video frame will be displayed.
StopMod
Select the video output to be displayed after the V1 receives a stop
command. Set stop mode to either show a field/frame from the drive (
Still
)
or show the image present on its input (
EE
).
Jog On Ch
Select between “
1&2
”, “
3&4
”, “
5&6
” and “
7&8
”. When the V1 is playing at
any speed below 100%, the audio will output from only two channels. Use
this option to select which tracks the audio will be on when the V1 is playing
at any speed below 100%.
FastMod
Select between
Norm
(normal) and
Enhan
(enhanced). Enhanced mode
will provide the best video preview in Fast Forward and Fast Rewind
Set to Normal for V1-HD installed with the independent record and play
option.
JogSpeed
Sets the maximum speed in Jog mode to
100%
or
FULL
(no limit).
PL1Field<%
The speed shown in percentage will define the speed under which the V1
will only play odd fields. If you want to play odd and even fields at all
speeds, select 0%. For Slow Motion applications you must set this
parameter to “0” and save it.
ChaseFWL
The number of frames defined in this option will set the free-wheel of the
chase mode between 1 and 10 frames or “0”. If your time code is reliable
set to “0”. When set to a value between 1 and 10, the V1 will play the same
field for the specified amount of frame(s) before it stops and wait for the
new time code to chase.
This function is useful to reduce the audio noise during the chase
command. If you know that your source does not have drop-outs in the time
code, set this value to 1.
