V_1.OM.000160.DRM
Page 47
Version 5.0
Doremi Labs, Inc.
10 Option Menu
To call up the OPTION MENU Hold the
OPTION
and press the
MENU
×
(or down key
Ø
)
buttons. Use the arrow keys to scroll through the menu selections.
Use the
++
or
--
buttons to scroll through the sub-menus. The
TOGGLE
button sets the
parameters for the selected sub-menu. Press
TOGGLE
to increase or increment a value and
hold
OPTION
and
TOGGLE
to decrease or use the
JOG
wheel.
TOGGLE
is also used to execute a command (OPTION MENU (5) and (6)), you will be
prompted “are you sure?” press
ENTER
for yes or
ESC
for no.
To enter time code numerals use the numeric keypad. To enter numbers for the IP, Time and
Date use the keypad and press the “.” button to skip from one section to the next. Press
ENTER
to save your settings.
Commands that change the mode of operation, such as changing the IP, Subnet Mask, SCSI
ID, rec/play mode etc, will require you to reboot the V1. Please wait 30 seconds before
rebooting the V1 to ensure that the new settings take effect.
(00) Info/Mode
V1 (no.)
Displays the V1 Version number
IP and Mask below must be set to conform to your LAN so that you can operate the V1 and
upgrade the firmware via the Ethernet connection.
IP (no.)
Displays the current IP number of the V1. (Only part of the IP number is
displayed, to view the rest press TOGGLE)
Set the IP number by using the keypad. Press “.” to jump between the
sections. After inputting the IP numbers press
ENTER
. You will also need
to go to OPTION MENU (5)
Save Setngs
and save.
Wait 30 seconds and restart the V1 for the setting to take effect.
Mask (no.)
Displays the current IP number of the V1. (Only part of the IP number is
displayed, to view the rest press TOGGLE)
Set the Mask number by using the keypad. Press “.” to jump between the
sections. After inputting the Mask numbers press
ENTER
. You will also
need to go to OPTION MENU (5)
Save Setngs
and save.
Wait 30 seconds and restart the V1 for the setting to take effect.
The functions below provide general information about your V1. Please have this information on
hand prior to contacting Doremi technical support.
S/N: (no.)
Displays the unique serial number of your V1.
(no.) Megs RAM
The total RAM on the V1 motherboard.
