V_1.OM.000160.DRM
Page 14
Version 5.0
Doremi Labs, Inc.
3.2 Power On and Shut Down
To power the V1 on or to shut it down, just press on the power button located on the front panel
– make sure the V1 is connected to power according to paragraph
3.1.3
.
Figure 6: Power Button - Front Panel
3.3 Ethernet
To set up the Ethernet network, connect the Ethernet cable to the Ethernet port of the V1 unit as
presented below – note that if your unit is fitted with an optional Gigabit Ethernet connector, that
optional connector has to be used instead of the connector presented below:
Figure 7: Ethernet Connector – Rear Panel
Power Button
Default Ethernet
connector
