V_1.OM.000160.DRM
Page 46
Version 5.0
Doremi Labs, Inc.
(04) Chase Mode
Specifies how the V1 will chase
to time code.
Off
Normal mode of operation
when the unit is controlled by a
workstation via the 9 pin RS-422 connection.
LTC
In this mode the V1 will chase the time code fed through the
TIME
CODE INPUT
jack. This mode is recommended when no RS422 9
pin control is present.
Serial TC
In this mode the V1 will chase the time code received on the RS-
422 connection. This mode requires a special cable and it is
recommended only if no RS422 9 pin control is present.
Play lock
The play-lock is a chase to time code function. When the play-lock
is set the V1 will chase the incoming Time Code to start the play,
but then will keep in playing until the incoming time code stops
completely (i.e. the same value and the time code is not
incrementing), or disappears.
After the playback starts the incoming Time Code is not checked for
validity, it will only be checked for presence or if not moving.
Note
:
The Chase to LTC Mode above is different than the OPTION
PLAY Command also referred to as Chase Command (see paragraph
6.5
).
(05) Vid Source
Displays the input source, “SDI” for HD-SDI and SD-SDI.
(06) Aud Source
Specifies the audio input format. Select between
Analog, AES
or
SDI
(for
embedded audio on SDI). Formats available depend on the options
installed.
(07) INFO/T-Left
This menu selection provides information on the current V1 settings and the
parameters of the currently loaded file. None of these settings can be
changed in this menu.
